Melt infiltration for the preparation of finely dispersed Ni-FeOx nanoparticles on SBA-15 for the hydrodeoxygenation of m-cresol - Université de Poitiers Accéder directement au contenu
Article Dans Une Revue Catalysis Today Année : 2024

Melt infiltration for the preparation of finely dispersed Ni-FeOx nanoparticles on SBA-15 for the hydrodeoxygenation of m-cresol

Résumé

The polymer-assisted melting infiltration method was used to finely disperse Ni, Fe and bimetallic Ni-Fe precursors in ordered mesoporous SBA-15 support. This approach allowed to obtain small Ni nanoparticles, in the order of 2 nm in size, with finely dispersed iron oxide surrounding metallic Ni, without evidence of Ni-Fe alloy formation. The catalysts were used in the HDO reaction of m-cresol at 300 °C and atmospheric pressure. The conversion of m-cresol was found to be dependent on Ni content, with the total reaction rate decreasing when Ni is partially replaced by iron. Toluene was the main product obtained for both, mono Ni and bimetallic Ni-Fe catalysts, thus suggesting that nickel nanoparticles when in the form of small sized particles, are the active sites for deoxygenation, independent on the presence of oxophilic iron site in their proximity. Such findings will serve for the further design of effective catalysts for the upgrading of lignin-derived bio-oil.
Fichier principal
Vignette du fichier
CATTOD-D-23-00305-revised version.pdf (1.39 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04439481 , version 1 (05-02-2024)

Licence

Paternité - Pas d'utilisation commerciale - Pas de modification

Identifiants

Citer

R. Deplazes, C.A. Teles, C. Ciotonea, A. Sfeir, N. Canilho, et al.. Melt infiltration for the preparation of finely dispersed Ni-FeOx nanoparticles on SBA-15 for the hydrodeoxygenation of m-cresol. Catalysis Today, 2024, 430, pp.114514. ⟨10.1016/j.cattod.2024.114514⟩. ⟨hal-04439481⟩
17 Consultations
5 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More